Home Contact Us • 1.800.575.4835 • Privacy Policy

LiftMat Series Floor Height Lifts

Get the advantage of four sided accessibility without the expense or hassle of digging a pit for your lift table. LiftMat lift tables have a collapsed height as low as 3 inches. A unique low profile ramp allows them to be fed with a hand pallet truck.

The LIFTMAT line is an extremely low profile series of lifts. They are ideally suited for any application where the load
is evenly distributed. Because there is little “section” or thickness to the legs and platform, the structure does not
respond well to off-center or eccentric loads. When in any raised position, this machine is not suitable for any side
or hinged end axle loads. A maximum of a 25% end axle load may be applied over the roller end only.

 

Call 800-575-4835 to Order

Model
Number
Capacity
(lbs.)
Low
Height
Raised
Height
Travel
(Vert)
Standard
Platform
(Min.)
Oversize
Platform
(Max.)
Standard
Voltage
Ship
Weight
Base
Price
Over
Size
Top
LM2.2-28 2,200 3 1/8" 31 1/2" 28 3/8" 24" x "60" 48" x "95" 115/1/60 600 Consult Sales Consult Sales *
OPTIONS:
MECHANICAL
30’’ long ramp with diamond plate
Bellows skirting, vinyl, black and yellow 3’’ pleats (requires minimum top size of 36” x 72”), installed
Consult Sales
HYDRAULIC
Additional hydraulic hose.
Delete power unit and controls.
Consult Sales
ELECTRICAL
Control panel for 460/3/60 primary.
One Touch Auto Leveling.
Consult Sales

LiftMat APPLICATION CONSIDERATIONS:

  • The LIFTMAT is NOT suitable to mount a conveyor of any type.
  • This lift is NOT suitable for washdown applications.
  • Loading by hand pallet jack: Remember, to push a load, any load, up an incline gets more difficult as the weight increases. It is recommended that when using a hand pallet jack that the weight be kept to a minimum.
  • Longer ramp may be required to reduce the angle of incline for unstable and low clearance loads.
  • When using a pallet jack for off loading, it may be difficult to reintroduce the forks into the pallet due to the angle of the ramp. It is recommended that either the pallet jack be left on the table with the load or a longer ramp be selected to eliminate this problem.
  • The electric power unit is external.
  • Air operated power unit is not available.
  • 5’ of hydraulic hose is standard, longer lengths at an additional cost.